当前时间:
加入收藏

联系方式

  • 电话/传真:0731-58290411
  • 邮编:411201
  • Email:njgcl_hnust@163.com
  • 地址:雨湖区桃园路湖南科技大学难加工材料高效精密加工湖南省重点实验室
您现在的位置是:主页 > 科研信息 >

科研论文统计

点击数:时间:2016-09-23 10:45作者:管理员

序号 论文名称 发表杂志 日期 作者
1 Study on the model of high efficiency and low carbon for grinding parameters optimization and its application Journal of Cleaner Production 2016 邓朝晖
2 A theoretical and experimental study on laser-induced deterioration in wet grinding of Al2O3 engineering ceramic International Journal of Advanced Manufacturing Technology 2016 邓朝晖(2)
3 Evolution and equivalent control law of surface roughness in shear-thickening polishing International Journal of Machine Tools and Manufacture 2016 李敏
4 The grinding performance of a laser-dressed bronze-bonded diamond grinding wheel International Journal of Advanced Manufacturing Technology 2016 邓辉
5 efficient and precision laser profiling of bronze-bonded diamond grinding wheels based on a single-layer deep-cutting intermittent feeding method Optics and Laser Technology 2016 邓辉
6 Study on methods to optimize laser-sharpening quality, efficiency and topography Precision Engineering 2016 邓辉
7 Influence of ultrasonic assisted grinding on Abbott-Firestone curve International Journal of Advanced Manufacturing Technology 2016 陈海锋
8 Online monitoring of truing arc-shaped diamond wheel by acoustic emission signal Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture 2016 陈冰
9 Comparison of the machinability of titanium alloy forging and powder metallurgy materials International Journal of Advanced Manufacturing Technology 2016 孙富建
10 Modeling constitutive relationship of 6013 aluminum alloy during hot plane strain compression based on Kriging method Transactions of Nonferrous Metals Society of China 2016 肖罡
11 Constitutive Analysis of 6013 Aluminum Alloy in Hot Plane Strain Compression Process Considering Deformation Heating Integrated with Heat Transfer Metals and Materials International 2016 肖罡
12 Global modeling for elevated temperature flow behavior of 6013 aluminum alloy during two-pass deformation International Journal of Materials Research 2016 肖罡
13 Shear-thickening polishing method International Journal of Machine Tools & Manufacture 2015 李敏
14 Modeling Material Flow Behavior during Hot Deformation Based on Metamodeling Methods Mathematical Problems in Engineering 2015 肖罡
15 On-machine truing of diamond wheel and high-efficiency grinding of monocrystal silicon for aspheric surface Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture 2015 陈冰
16 On-machine precision form truing of arc-shaped diamond wheels Journal of Materials Processing Technology 2015 陈冰
17 An investigation into parallel and cross grinding of aspheric surface on monocrystal silicon International Journal of Advanced Manufacturing Technology 2015 陈冰
18 A model for prediction of surface roughness in ultrasonic-assisted grinding International Journal of Advanced Manufacturing Technology 2015 陈海锋
19 Depth-of-cut errors in ELID surface grinding of zirconia-based ceramics International Journal of Machine Tools & Manufacture 2015 邓朝晖(2)
20 Effects of welding parameters on weld geometry during high-power laser welding of thick plate International Journal of Advanced Manufacturing Technology 2015 李时春
21 Study of thrust forces and delamination in drilling carbon-reinforced plastics (CFRPs) using a tapered drill-reamer International Journal of Advanced Manufacturing Technology 2015 苏飞
22 Effects of cutting parameters on dry machining Ti-6Al-4V alloy with ultra-hard tools International Journal of Advanced Manufacturing Technology 2015 孙富建
23 Effect of annealing treatment on microstructure and mechanical properties of hot isostatic pressing compacts fabricated using Ti-6Al-4V powder Powder Metallurgy 2015 孙富建
(2)
24 Online tangential laser profiling of coarse-grained bronze-bonded diamond wheels International Journal of Advanced Manufacturing Technology 2015 邓辉(2)
25 Processing parameter optimization for the laser dressing of bronze-bonded diamond wheels Applied Surface Science 2014 邓辉
26 A theoretical and experimental study on the pulsed laser dressing of bronze-bonded diamond grinding wheels Applied Surface Science 2014 邓辉
27 Influences of dressing lead on surface roughness of ultrasonic-assisted grinding International Journal of Advanced Manufacturing Technology 2014 陈海锋
28 Dynamic keyhole profile during high-power deep-penetration laser welding Journal of Materials Processing Technology 2014 李时春
29 Experimental study of phenomena and multiple reflections during inclined laser irradiating Science and Technology of Welding and Joining 2014 李时春
30 Investigation of keyhole plasma during 10 kW high power fiber laser welding Laser Physics 2014 李时春
31 Plasma inside and outside keyhole during 10 kW level fiber laser welding Acta Physica Sinica 2014 李时春
32 Relationship between spatter formation and dynamic molten pool during high-power deep-penetration laser welding Applied Surface Science 2014 李时春
33 Effects of cutting parameters on dry cutting of aluminum bronze alloy International Journal of Advanced Manufacturing Technology 2014 孙富建
(2)
34 Machining performance of a grooved tool in dry machining Ti-6Al-4 V International Journal of Advanced Manufacturing Technology 2014 孙富建
 
35 Ductile regime grinding aspheric surface of hot-pressed zinc sulfide Applied Mechanics and Materials 2014 陈冰
36 An experimental study of the effects of ultrasonic vibration on grinding surface roughness of C45 carbon steel International Journal of Advanced Manufacturing Technology 2013 陈海锋
37 Modeling and predicting of surface roughness for generating grinding gear Journal of Materials Processing Technology 2013 陈海锋
38 Combining rough set and case based reasoning for process conditions selection in camshaft grinding Journal of Intelligent Manufacturing 2013 邓朝晖
(2)
39 A methodology for contour error intelligent precompensation in cam grinding International Journal of Advanced Manufacturing Technology 2013 邓朝晖
(2)
40 Research on grinding temperature of a new diamond grinding wheel Advanced Materials Research 2013 伍俏平
41 Experimental observation and simulation of keyhole dynamics during laser drilling Optics and Laser Technology 2013 李时春
(2)
42 Progress of researches on the surface topography detection techniques for grinding wheel Advanced Materials Research 2013 刘伟
43 Research progress of on-line measurement and compensation technology about grinding wheel wear Advanced Materials Research 2012 刘伟
44 Characteristics of zinc behavior during laser welding of zinc "sandwich" sample Optics and Laser Technology 2012 李时春
(2)
45 Experimental study of material removal rate for rotary curved surface workpieces of Si3N4 in chemical-mechanical polishing using taguchi technique Advanced Materials Research 2012 万林林
46 基于球切多面体和光密度的砂轮建模与测量 机械工程学报 2016 邓朝晖
47 剪切增稠抛光的材料去除数学模型 机械工程学报 2016 李敏
48 基于组合赋权的机床加工工艺方案多目标综合决策方法 中国机械工程 2016 邓朝晖
49 凸轮轴高速磨削温度的实验研究 中国机械工程 2016 邓朝晖
50 凸轮轴数控磨削轮廓误差分析与补偿 中国机械工程 2016 邓朝晖(通讯)
51 凸轮轴数控磨削工件主轴转速优化建模与实验研究 中国机械工程 2016 邓朝晖(通讯)
52 凸轮轴数控磨削云平台的研究与设计 中国机械工程 2016 邓朝晖(通讯)
53 树脂基纤维复合材料钻削研究进 宇航材料工艺 2016 伍俏平
54 工程陶瓷磨削损伤建模与数值模拟研究进展 兵器材料科学与工程 2016 万林林
55 氮化硅陶瓷球面磨削亚表面损伤研究 中国陶瓷 2016 万林林
56 基于元模型方法的6013铝合金热变形流变行为建模 机械工程材料 2016 肖罡
57 基于克里金方法的6013铝合金多道次降温热压缩变形行为建模 机械工程材料 2016 肖罡
58 高功率激光深熔焊接时喷出金属蒸气动力学行为研究 应用激光 2016 李时春
59 单颗金刚石磨粒切削氮化硅陶瓷仿真与试验研究 机械工程学报 2015 刘伟
60 复杂曲面零件超精密加工方法的研究进展 机械工程学报 2015 李敏
61 扩展型混合磨削云PAAS系统的研究与设计 中国机械工程 2015 邓朝晖(通讯)
62 剪切增稠抛光加工Si3N4陶瓷的试验研究 华南理工大学学报(自然科学版) 2015 李敏
63 剪切增稠抛光磨料液的制备及其抛光特性 光学精密工程 2015 李敏
64 凸轮轴高速数控磨削在位测量技术 中国机械工程 2015 万林林
65 金刚石砂轮磨削氮化硅陶瓷数值仿真及实验研究 金刚石与磨料磨具工程 2015 万林林
66 纳米压痕和划痕法测定TiO2纳米薄膜的力学性能 表面技术 2015 龙东平
67 阳极氧化法制备TiO2薄膜的力学性能与摩擦磨损性能 机械工程材料 2015 龙东平
68 金属钛表面微纳结构制备表征及其亲疏水性研究 热加工工艺 2015 龙东平
69 阳极氧化钛基合金表面TiO2纳米管阵列的研究进展 材料导报 2015 龙东平
70 金刚石纤维砂轮的制备及磨削表面质量研究 机械工程学报 2014 伍俏平
71 基于新型金刚石砂轮的Al2O3陶瓷磨削性能 中国机械工程 2014 伍俏平
72 新型金刚石纤维的制备及其切削性能 机械工程学报 2014 邓朝晖
(通讯)
73 凹面轮廓凸轮轴成形磨削工艺研究 现代制造工程 2014 邓朝晖
74 金刚石/铜基粉末注射成形熔体温度对充填率影响的有限元模拟 机械工程材料 2014 邓朝晖
75 基于正交试验-遗传神经网络的陶瓷球面精密磨削参数优化 中国机械工程 2014 刘伟
76 基于材料参数修正的6013铝合金热变形本构模型优化 中国有色金属学报 2014 肖罡
77 6013铝合金平面热压缩流变应力曲线修正与本构方程 中国有色金属学报 2014 肖罡
78 6013铝合金的热变形行为及热加工图 材料热处理学报 2014 肖罡
79 脉冲激光切向整形径向修锐青铜金刚石砂轮 中国激光 2014 邓辉
80 热压硫化锌的超精密磨削加工 光学精密工程 2014 陈冰
81 碳纤维增强复合材料T型齿槽加工缺陷的形成机制 复合材料学报 2014 苏飞
82 碳纤维增强复合材料的铣削实验和微观形貌分析 兵工学报 2014 苏飞
83 碳纤维复合材料T型铣刀的切槽试验研究 机床与液压 2014 苏飞
84 粉末注射成型金刚石制品的烧结工艺 硅酸盐学报 2013 伍俏平
85 脉冲光纤激光修锐青铜金刚石砂轮 中国激光 2013 邓辉(2)
86 钎焊气氛对金刚石钎焊性能的影响 机械工程学报 2012 伍俏平
87 粉末注射成型金刚石制品的溶剂-热脱脂工艺 硅酸盐学报 2012 伍俏平
88 基于云计算的智能磨削云平台的研究与应用 中国机械工程 2012 邓朝晖
89 基于交替隔点插值的凸轮升程拟合方法在磨削加工中的应用 机械工程学报 2012 邓朝晖
(通讯)
90 凸轮轴数控磨削工艺智能应用系统研究与开发 计算机集成制造系统 2012 邓朝晖
91 凸轮轴磨削加工速度优化调节与自动数控编程研究 中国机械工程 2012 邓朝晖
(通讯)
92 金刚石/铜基钎料粉末注射成型工艺参数的优化 机械工程材料 2012 伍俏平
93 齿轮传动非线性动力学键合图建模研究 重庆大学学报 2012 陈海锋
(2)
94 纤维状聚晶金刚石复合片刀具的切削性能及刀具磨损机理 机械工程学报 2011 邓朝晖
95 铜基钎料真空钎焊镀钛金刚石 硅酸盐学报 2011 邓朝晖
96 考虑间隙与摩擦时的齿轮传动动力学键合图建模研究 机械工程学报 2011 陈海锋
(2)
97 含持续预载的旋转弹簧振动系统键合图建模与仿真 振动与冲击 2011 陈海锋
(2)
98 粗糙集—基于实例推理的凸轮轴数控磨削工艺专家系统 机械工程学报 2010 邓朝晖
99 高速高效加工领域科学技术发展研究 机械工程学报 2010 邓朝晖
100 高速烟支质量检测装置中陶瓷涂层/浸树脂石墨摩擦副材料的选择研究 摩擦学学报 2010 伍俏平
101 爆炸喷涂Al2O3-20%TiO2涂层与浸树脂石墨摩擦副的磨损行为 机械工程材料 2010 伍俏平
102 新型砂轮研究进展及其展望 中国机械工程 2010 邓朝晖
103 干摩擦力的键合图建模方法及应用 应用基础与工程科学学报 2010 陈海锋
(2)